Eaton Launches New Metal 3D Printing Program to Reduce Development Time, Improve Efficiency
Power management company Eaton today announced its Vehicle Group is implementing a new 3D metal printing program as a part of its Industry 4.0 strategy to reduce development time and improve efficiency. The first metal printer system was installed at the Kings Mountain, N.C., facility, and a global deployment of 3D polymer printing technology is slated to be completed by first-quarter 2021.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20201021005571/en/
Eaton’s Vehicle Group reduced cost and development time using its 3D metal printing capabilities to produce this oil fill nozzle. (Photo: Business Wire)
The 3D printers are being utilized to create high-quality fixtures, safety devices, automation grippers for assembly and handling, and maintenance components requiring replacement. Prototype development is following the same strategy to support faster product development trials and improve efficiency.
Improving output and efficiency
To speed up the design process, scanners are used to create 3D models of existing components. This process allows components to be reverse-engineered to better leverage 3D printing capabilities, including changing component design to use less material, the addition of different topography elements or consolidating multiple components into a single part.
As an increasing number of 3D printers are deployed across the globe, Eaton’s Vehicle Group has been realizing further operational improvements including lead-time reduction and cost savings.
The 3D printing technology adds material only where it is needed and allows more advanced designs to be developed. Together, these two factors reduce the amount of post-processing operations needed while reducing material cost.
A closer look at 3D printing
The process to print metal parts and components begins with powdered metal stored in a rod and held together by wax and a polymer binder. Similar to extrusion, the metal is melted, and the 3D printer begins to add layer after layer, based on its programmed schematics.
Once the printing process is complete, the part or component is run through a chemical bath to remove most of the polymer binder. The part then goes through a furnace to remove the remaining wax and polymer, and to fuse the metal material in a high-density structure. Depending on what the printed part or component is to be used for and which material it was printed with, an additional heat treatment process can be performed to increase part strength even further.
The total lead time to get a component printed depends on several criteria, including the size and intricacy of the part. Depending on the part or component design and required tolerances, it also can undergo post-processing. The debinding operation and heat treatment are done in batches, with several different components going through these processes together while the next components are being printed. Although the printer, debinding and furnace work in an integrated loop, there is flexibility to increase the number of printers without having to duplicate either the debinding or furnace.
Going forward, the Vehicle Group’s 3D printing capabilities will be used to further reduce production time and drive efficiency. Learn more about the Vehicle Group’s Industry 4.0 technologies and benefits.
Eaton’s mission is to improve the quality of life and the environment through the use of power management technologies and services. We provide sustainable solutions that help our customers effectively manage electrical, hydraulic, and mechanical power – more safely, more efficiently, and more reliably. Eaton’s 2019 revenues were $21.4 billion, and we sell products to customers in more than 175 countries. We have approximately 92,000 employees. For more information, visit www.eaton.com.
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
(216) 333-2876 (cell)
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
I’mbesideyou Inc. Launched “UNION OF EMOTIONS” Service Using AI to Visualize Cheering Each Other Across National Borders30.7.2021 16:25:00 CEST | Press release
I’mbesideyou Inc. (Setagaya-ku, Tokyo CEO: Shozo Kamiya, hereinafter referred to as I'mbesideyou) launched the "UNION OF EMOTIONS" service on July 23, 2021, the opening day of an international sporting event. This is the first time we have been able to visualize people cheering each other with emotion analysis AI. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210730005404/en/ A visualization of the emotions of cheers flying around the world: Click on each cheer to learn more about that country. (Photo: Business Wire) More than 20,000 cheers have already been sent from more than 79 cities across more than 14 countries around the world, and the sight of the cheers flying across the globe has moved many people on social media. UNION OF EMOTIONS, is the world's first example of people's emotions connecting in real time across countries with the help of AI. It is scheduled to be available until August 8, when the closing ceremon
Palace Bidco Oy (“WSIP Bidco”) Has Received Necessary Regulatory Approval Concerning the Recommended Cash Offer to the Shareholders of Adapteo Plc (“Adapteo”)30.7.2021 14:23:00 CEST | Press release
This announcement is not an offer, whether directly or indirectly, in Australia, Canada, Hong Kong, Japan, New Zealand or South Africa or in any other jurisdiction where such offer pursuant to legislation and regulations in such relevant jurisdiction would be prohibited by applicable law. Shareholders not resident in Sweden or Finland who wish to accept the Offer (as defined below) must make inquiries concerning applicable legislation and possible tax consequences. Shareholders should refer to the offer restrictions included in the section titled “Important information” at the end of this announcement and in the offer document which was published on 23 June 2021. Shareholders in the United States should also refer to the section titled “Special notice to shareholders in the United States” at the end of this announcement and in the offer document. On 17 May 2021, WSIP Bidco, a private limited liability company formed on behalf of, and indirectly wholly owned by, West Street Global Infra
Taipei Exchange Launches Pioneer Stock Board to Support Innovative Enterprises30.7.2021 10:00:00 CEST | Press release
The Taipei Exchange, TPEx, launched Pioneer Stock Board (PSB) on July 20, 2021, which welcomed its first company on July 26. Pioneer Stock Board marks the evolution of the stock market into an innovation-friendly ecosystem. It aims to facilitate entry to capital markets for more innovative enterprises. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210730005008/en/ Taipei Exchange launches Pioneer Stock Board to support innovative enterprises (Photo: Business Wire) At the PSB Launch Ceremony, Premier Su Tseng-chang delivered the opening speech, emphasizing the government’s support. Su said, “Taiwan’s capital market breaks new ground today, by establishing this board. PSB will support innovative enterprises, a key driver of economic transformation, by providing companies with quick access to capital needed for continued growth.” Dr. Tien-mu Huang, Chairperson of Financial Supervisory Commission, remarked, “Innovation underpin
ITRS Group Continues Expansion With the Acquisition Of Opsview30.7.2021 10:00:00 CEST | Press release
ITRS Group, a leading provider of real-time monitoring and analytics software, has acquired 100% of Opsview Limited, a modern, scalable monitoring platform, which provides unified insight into dynamic IT operations on-premises, in the Cloud or hybrid. Opsview will remain and operate as a separate brand and entity. The purchase of Opsview aligns well with ITRS’ strategy to build, buy and partner to deliver smart, automated and predictive end-to-end monitoring solutions for increasingly complex IT estates across industries. This development follows the successful strategic acquisitions of Sumerian, OP5 and Uptrends. Guy Warren, CEO of ITRS commented: “Opsview is trusted by hundreds of businesses, government organisations and service providers globally. This acquisition will enhance our technological innovation, increase our portfolio capability, and provide continued expansion across our global support services.” Mike Walton, CEO and founder of Opsview said: “Partnering with ITRS represe
Schneider Electric Moves Forward With Its Sustainability Impact Targets, Mobilizing Support From Employees, Partners and Customers30.7.2021 08:32:00 CEST | Press release
Schneider Electric, the leader in the digital transformation of energy management and automation, published today its half-year progress overview on setting up and advancing on its 2021-2025 sustainability impact targets. Schneider Electric, named as the world’s most sustainable corporation 2021 by the Corporate Knights Global 100 Index, announced the acceleration of its sustainability strategy in January, aligned to its commitments regarding climate, resources, trust, equal opportunities, generations, and local communities. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210729006295/en/ Schneider Sustainability Impact - H1 Results (Graphic: Business Wire) Since then, the Group has successfully launched The Zero Carbon Project, its initiative to halve carbon emissions of its top supply chain partners by 2025, a call to action already joined by 91% of them. By engaging, training, and supporting the sustainable transformation
Takeda Delivers Solid First Quarter FY2021 Results, Positioning Company to Accelerate Topline Growth and Continued Pipeline Progress30.7.2021 08:00:00 CEST | Press release
Takeda Pharmaceutical Company Limited (TOKYO:4502/NYSE:TAK) (“Takeda”) today announced financial results for the first quarter of fiscal year 2021 (period ended June 30, 2021). Based on the solid first-quarter results, the Company also confirmed its fiscal year 2021 management guidance and forecast. Fiscal year 2021 remains a year of inflection with Takeda positioned for topline acceleration and continued pipeline progress, including critical regulatory submissions, potential approvals and additional new molecular entities (NMEs) advancing in pivotal studies. Costa Saroukos, Chief Financial Officer, commented: “With the Shire integration behind us and continued transformation over the last two years, we’ve pivoted towards accelerating topline growth and investing in R&D to fuel our highly innovative pipeline. Takeda’s first-quarter results demonstrate the continued strength of our 14 global brands and, with the business momentum from this strong start to our fiscal year, we remain on t
Conviva and the Trade Desk Partner to Improve Contextual Advertising for Premium Streaming Publishers29.7.2021 19:04:00 CEST | Press release
Conviva, the intelligence cloud for streaming media, and global advertising technology leader The Trade Desk, have entered a first-of-its-kind partnership to provide the streaming advertising industry the contextual content signals needed in the bidstream to improve their connected TV campaigns based on signals and effectiveness. Together, the two companies will help premium publishers supply programmatic buyers with the network, genre, rating, length and other detailed data sorely lacking in the streaming industry while still maintaining data control. Details of the partnership, product offering, participating publishers and how premium publishers can participate and benefit, will be available via a webinar in August. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210729005953/en/ The Trade Desk + Conviva (Graphic: Business Wire) According to Conviva’s State of Streaming Advertising report, released in June 2021, only 39% o
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.Visit our pressroom